the Device, measuring thermal electromagnetic radiation the temperature of the subject (object) that represents user information in a convenient form, called a pyrometer (thermometer). In the industry use of the device (characterized by high precision and contactless devices that are intended for use where it is impossible (difficult) application of stationary pyrometers.
How does it work
The principle of operation of IR thermometer series BALTECH TL “ThermaLine” is based on a technique of radiation pyrometry. Structurally, the device consists of a pyrometric Converter and the device (digital, analog) display the received information. The IR device is, measuring in the infrared part of the spectrum the absolute value of the amplitude of electromagnetic radiation from the controlled object (object), converts the resulting value into the temperature.
Focused by the optical system a heat beam from the object falls on the sensor of the pyrometer, and then the output is formed elektrosignal, which is proportional to the temperature value of the subject (object) of measurement. The signal, after passing through an electronic inverter and once in the measuring and calculating device is processed in it. The result of the transformation is shown in the display (modern thermometers usually have a digital display).
To get the value of the temperature of the object is enough to perform 3 steps:
- to Turn the unit on;
- Put the thermometer at the desired object;
- Click.
As you can see, remote method of measuring the temperature of objects is a fairly simple operation. Operation can be performed at almost any distance. The range of pyrometers is limited by two factors: the transparency of the medium and the square of the measured spot.
Which should be
it is Recommended to purchase non contact thermometer with the ability to:
- data Transfer to a PC for further analysis (if required). Need a USB interface;
- to Record photos and videos. Simultaneous recording of video when measuring the temperature of an object is useful for analyzing the received data;
- Check the data, write it to the memory of the thermometer and hold a reading on the display after a measurement;
- Thermocouple. Advanced models of pyrometers are equipped with a small temperature sensor that in addition to measuring the temperature of the object, maybe even to calibrate the device by calculating the emissivity of the object.
- Ratio-of-sight, D. SC. at least 50:1, like pyrometers BALTECH TL.
Please note that the best thermal complex for infrared diagnostics today is thermal BALTECH TR-0180 Zorro.
If you need more information about methods of measuring temperature, or you want to organize a Department of “Thermography and energy audit”, we recommend you to sign up for a refresher course TOP-104 “BALTECH”company.