Manufacturing of structures made of concrete are required to comply, strictly observing the production technology. If you want to get quality products, you should pay much attention to the observance of a temperature mode.
concrete Heating
By lowering the temperature to 5 degrees, the concrete (concrete structures) should be warmed to accelerate the curing of the product. Designed to heat construction (thermoelectric) Mat. This high-tech device doesn’t require much time for preparation and acquisition of additional instruments of power.
In 10-20 hours, the hardening of the concrete. Termomaty equipped with infrared rays, able to warm up the concrete structure to the depth, catalytically acting on the concrete structure. This is a distinctive feature ermamatov when heating concrete. The temperature of the concrete at this stage it is very important to produce constantly.
First termomaty began to use small private companies, but then sharply increased interest from the major manufacturers jbk. They realized that the use of ermamatov for heating concrete is an excellent alternative to a couple.
Made on the basis of radiant films, termomaty mounted in a PVC jacket. This heater (thickness about 12 mm), equipped with thermal insulation and a heat reflective layer. It can be produced any size and different configurations. Heat dissipation is evenly performed on the entire surface and is directed in the same direction.
Control of heating of concrete
If termomaty designed for heating concrete, to control its temperature using the pyrometer electronic manual. Using infrared device BALTECH TL-0208C at several points periodically measured indicators. The manual device is able to capture the surface temperature of objects at a distance, so the measurements are taken remotely.
working Principle
Diagnostic tool detects thermal radiation emitted from the controlled object. The program, analyzing the received signal, gives the display of the pyrometer temperature value.
The advantages of the electronic pyrometer BALTECH TL-0208C for heating concrete are:
- Compact size. The unit is easily transported in a conventional bag;
- Versatility. The device is used not only for controlling heating of the concrete. It can be used in any applications requiring the measuring of the temperature;
- if there is no direct contact with the controlled object. Has the ability to perform measurements at points located high off the ground or in hard to reach places.
BALTECH recommends the use of infrared Windows (IR glass) for measuring the temperature of the concrete in drying chambers, regardless of whether there is in-camera and basic thermometers and anemometers to control humidity. Infrared window BALTECH TR-55W additionally allow to control the process of “ripening” of the concrete in the heat chamber and to compare with current testimony.